Ford Mondeo MK4 Left Dashboard Cover - image

Files (2)

Clip.stl

STL

17.0 KB

MondeoCover.stl

STL

11.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.22

Filament only at roughly $24/kg PETG / ASA

Print time

15m–26m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Clip.stl	Clip	17.0 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.
MondeoCover.stl	Cover / cap	11.8 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Ford Mondeo MK4 Left Dashboard Cover

0 downloads42 views0 likes

Shared by

Alfred

Verified

Description

Copy of the left dashboard cover eg. to add a phone holder. Fits a Ford Mondeo MK4 (2007-2014?) Use double-faced adhesive tape. Could not be bothered to shape the clips of the original part. Does not fit perfectly - but good enough for me. If printed on straight edge, no support is needed. The clip is an example on how you can attach a phone case. Example for a Samsung Galaxy A3 here: http://www.thingiverse.com/thing:2012441