Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Ford XR4 (ST150) Wheel Centre Cap for 17" Factory Rims
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is my design for an 2007 Ford Fiesta XR4 Wheel Centre Cap for the factory 17" rims. It was generated from scratch on FreeCAD 0.18 for Windows x64. The factory centre caps are known to pop out and get lost, so they are starting to get rare and expensive. This will clip into the factory rim and clear the wheel nuts. I have set this to a high polygon count so that the face can be as smooth as possible. I print with the clips down, outward face up, with full supports. It gets a bit messy underneath, but since it is not visible that does not bother me. I've only printed this on PLA so far for test fitting - I'd love to see the results and get some tips on how best to print and finish this. Note that it has XR4 in the centre embossed on the front face using a trueType Font that I created from scratch from factory badges. The centre depression is a tidy 65mm, so a 65mm Ford Gel Sticker (available on eBay or Aliepxress) would go well here and cover that up for the overseas cars, which are known as the ST150 in every other market but Australia.
Compatible Vehicles
Originally published on thingiverse.com by Luke Plaizier (Lukeyson) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
