Files (1)

Gen1HondaInsightDashMount.stl

STL

126.1 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

14g

Based on 25% main infill across listed model files

Material cost

$0.34

Filament only at roughly $24/kg PETG / ASA

Print time

24m–41m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Gen1HondaInsightDashMount.stl	Mount / bracket	126.1 KB STL	13g $0.32	14g $0.34	31g $0.75	Ensure proper fit in the left center air vent before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Gen 1 Honda Insight Dash Mount

0 downloads189 views0 likes

Shared by

Alfred

Verified

Description

This is a dash mount for a gen 1 (2000-2006) Honda Insight, it fits into the left center air vent above the stereo. The holes match up to a ProClip USA mount. I have printed it in PLA for testing and PETG for a final print to be able to stand the temperatures and the sun better. I HIGHLY recommend using PETG or ABS as a minimum. PLA will warp in the sun.

Updated Jul 18, 2026

Originally published on thingiverse.com by Mike (mtgeekman) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.