Gen 1 Mini Cooper R53 Cup Holder flexible parts - image

Files (1)

R53_mini_Cup_Holder_Bottom.stl

STL

8.3 MB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

TPU (95A shore hardness as recommended by the designer)

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

40% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Gen 1 Mini Cooper R53 Cup Holder flexible parts

0 downloads3 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

TPU (95A shore hardness as recommended by the designer)

Saved part guidance

Strength start

Flexible infill settings, potentially with a lower infill density to maintain flexibility

Saved part guidance

Orientation / supports

supports likely

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Flexible material; verify heat and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Time and my child had destroyed half of my tabs to hold a cup in. So I made a new one, much stronger and flexes nice with 95A TPU. This is for the right side, but you can mirror the top to make it for the left (for RHD vehicles). Parts are orientated how they should be printed. You will need supports. I use a heavily modified Prusa Bear 2.5s, Overture TPU, 230/60. Top updated. Added Mini logo and shrunk overall height by 2mms for better fitment.