General Motors Opel Montage Suisse Badge

0 downloads45 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability, but ABS is suggested for this specific model

Saved part guidance

Strength start

20-30% infill for a balance between weight and strength

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

UV/weather exposure — ASA is the starting point

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Safety/IP review

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Recreation of the General Motors badge. I did not replicate the support structure on the rear of the badge. Guide holes are on the rear of the badge so that threads can be drilled & tapped for the threads of your choice. YouTube video for the making process - https://youtu.be/yd5LEN_AbUs If you plan to use on a vehicle, print in ABS to avoid warping in outside environments. Strictly non-commercial.