Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Adapter_M4.stl | Printable file | 605.9 KB STL | Slice file | Slice file | Slice file | Ensure proper fitment by scaling the part in the slicer if necessary |
| Adapter_M6.stl | Printable file | 607.1 KB STL | Slice file | Slice file | Slice file | Ensure proper fitment by scaling the part in the slicer if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Giulietta JDM shifter adapter
Print this part
Check the available model and saved setup details before opening your slicer.
Files
2 hosted model files
STL
Material
PETG or ASA
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill with 1.2-1.6mm walls
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is an adapter that adepts the standard Giulietta shift rod to the JDM shifters you can buy everywhere. - M6 or M4 If you are not stupid and you have not ripped of the thread off your shift rod, like I did, you can download the M6 version and secure the adapter with the nut of the original shift knob. But if you are stupid and have ripped off your thread you can drill a 3,5mm hole and cut a thread in the center of the shift rod and screw the adapter down with a M4 screw. - Fitment The part is optimized for the tolarences of my ender 3. If it does not fit over your shift rod or it has play, try to uniformly scale the part up or down by a few percent in your slicer.
Compatible Cars
Originally published on thingiverse.com by Laurin Ludwig (Barzar) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Alfa Romeo 159 Window button
Alfa Romeo 147 Snap-Fit Window Knob
Alfa 159 heated seat control bezel
Alfa Romeo 147 Gearknob
Car Alfa Romeo 159 - gear knob
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
