Glass holder for window regulator Smart ForTwo (450)

0 downloads41 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for heat resistance

Saved part guidance

Strength start

100% infill for strength, consider using modifiers in slicer

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-SA

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

TESTING IN PROGRESS (RC3) ------------------------------------------- This is a (reinforced) adaptable glass holder for Smart's ForTwo (450) window regulator, to replace original one that broke in the middle. You're welcome to test it! There is a howto on Evilution website you just need to rerool original cables http://www.evilution.co.uk/exterior/450_window_regulator_cable.htm To ease the prints pins are separated, you need to glue them on the main part after the print. Use the modifiers file on slic3r to define a 100% infill. Don't forget the inside of the door can become hot, print material must support it. This one as been printed with Protopasta HTPLA V2. Version for left door, mirror the print for right one.