Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
glove comparment latch for Mercedes
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA for better heat resistance
Saved part guidance
Strength start
20-30% infill for a balance between durability and weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a simple replacement glove compartment latch for a Mercedes 200 (1985) As the thieves in my area are too stupid to figure out the mechanism of the glove compartment, they managed to break it.... Couldn't find a new one. So I made a new one. Printed at 30% in PLA. But if you live under the African sun as I do, I'd recommend something less heat sensitive:).
Compatible Cars
Originally published on thingiverse.com by Jeremie Dupont (JeBear76) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Radio frame with pocket for Mercedes 190 W201
Mercedes-Benz
Mercedes 190E W201 Vent Surround
Mercedes-Benz
Side Air Vent for Mercedes 190 W201
Mercedes-Benz
Mercedes Benz 190E/W201 Handbrake Replacement Button
Mercedes-Benz
Console Pocket for Mercedes 190 W201
Mercedes-Benz
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
