Headliner Switch Panel for BMW vehicles w/ hole for monitor
Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Branden Rush (franklinrush)Designers selling from the US, Canada, the UK, the EU/EEA (except Iceland), Switzerland and Gibraltar can also list separate original designs for sale and receive 80% of the listing price, paid out by Stripe in your local currency (conversion fees may apply). Claiming credits you here; it doesn't put this imported part up for sale.
Description
Replica of a headliner switch panel from a 2004 BMW X3 with a hole cut out for the screen from a cheap back up camera monitor (without the case). Some prototyping tried on an Afinia H800, modded a bit and sent to Shapeways. Should know if it works in the future. Walls are a bit thin around sensor vents, but otherwise ok for their standards. Gave a lot of issues to the Afinia because of size... let me know if anyone has success, it's a pretty unique part though so I don't imagine it to be too popular. Oh and the little clip holders are made to re-use original metal clips. Update: Shapeways print was a success. Posted pics. Now I just have to wire the camera etc. they did bust off one of the side clips in shipping and are sending me a new print, but I'll likely just keep this one. So I may post the new one on eBay or somethin. The hole for the monitor was upside down- but that's fine, I can just install the camera upside down too. If the monitor is reversed, it just doesn't look as flush, but also fine.
Compatible Vehicles
Originally published on thingiverse.com by Branden Rush (franklinrush) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
