Hitch cap Mercedes Benz / Anhängerkupplung Deckel

0 downloads85 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill with 2-3 walls for durability

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Safety/IP review

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Hitch cover with Mercedes Benz Logo, made from from https://www.thingiverse.com/thing:4532764 and https://www.thingiverse.com/thing:1552272 Print Settings (Redline PLA) wall line count: 4 Infill 50% Speed 60mm/s Retraction 45mm/s/5mm 200°C Hotend, 60°C Bed plate bonding skirt combing mode all no supports printing duration at this settings about 5 hours Use bright colors, when printing in PLA or usind PETG, ABS or ASA, if you want dark colored Changelog ------------------- 2022_03_06 Updated to V2 - Ceiling changed to a rounding with lower angle to get a better print result without supports.