Holder for extra screens on Ford EcoSport
Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Tran Trung (trungtt)Designers selling from the US, Canada, the UK, the EU/EEA (except Iceland), Switzerland and Gibraltar can also list separate original designs for sale and receive 80% of the listing price, paid out by Stripe in your local currency (conversion fees may apply). Claiming credits you here; it doesn't put this imported part up for sale.
Description
I installed 4 cameras on my Ford EcoSport, 2 in front and 2 at the back, for parking aid, and 2 monitor screens inside the car. Normally 2 cameras in the front are displayed. The 2 at the back are only activated when the gear is reversed. This is the reason why only 2 monitor screens is needed. To attach the 2 screens on the console, I printed this thing. There is OpenScad file available for you to modify for your specific need. For my case, the screens, attached to this thing, are installed below the air-conditioner knob, just in front of the logo "Sync Microsoft". I use double sided sticky tape to stick 3 corners of this thing to 2 plastic sides and the rubber cover below. The wires for the screens come out from a gap between the rubber cover and the plastic console. You may want to print using black - in the picture I used white for printing to highlight the thing.
Compatible Vehicles
Originally published on thingiverse.com by Tran Trung (trungtt) · License: CC BY-SA
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
