Files (3)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Honda Civic 92-95 Trunk Emblem Badge Base
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
3 hosted model files
STL
Material start
PETG or ASA
Saved part guidance
Strength start
20-30% infill with 1.2-1.6mm walls
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
UV/weather exposure — ASA is the starting point
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This are bases for flat emblems that are cheap and it can stick to the base just using the included double sided tape. I designed 3 versions for 3 different dimensions: - 63mm x 54mm (OEM size for the Civic EJ1) - 68mm x 56mm - 72mm x 60mm For fixing the base to the trunk you can use two M3 screws and nuts, I would be better if you use a auto locking nuts on the back and some washer to spread the load into the metal sheet. Also be sure to use some gasket maker around the bolts so you don't get some water getting into the trunk. The emblems can be bought on ebay, amazon or aliexpress. A link as example to buy the same emblems I used is: https://www.ebay.com/itm/284108633183 If you are on Argentina you can ask IRPRacing: https://irpracing.com.ar/producto/emblemas-exteriores-honda-civic-accord-88-00-varios-colores/
Originally published on thingiverse.com by Nicolas Ramiro Vega (NvNw) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
