Civic_shelf_assy_shaft.stl

STL

70.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

12g

Based on 25% main infill across listed model files

Material cost

$0.29

Filament only at roughly $24/kg PETG / ASA

Print time

21m–34m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Civic_shelf_assy_shaft.stl	Primary model	70.9 KB STL	11g $0.27	12g $0.29	26g $0.64	Ensure a rubber tube is available for post-print assembly

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Honda civic shelf assy holder shaft

0 downloads7 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Verified

For the 7th, 8th and 9th gen Civic 3 and 5 doors. After printed you need a rubber tube for the right side to get a factory like part.

Published Jul 10, 2026Updated Jul 10, 2026

Originally published on thingiverse.com by Melkes Antal (Tonxzy) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.