Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Honda Key Housing (UK Honda Accord 2003)
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
2 hosted model files
STL
Material start
PETG or ASA for durability in outdoor conditions
Saved part guidance
Strength start
20-30% infill for a balance between strength and weight
Saved part guidance
Orientation / supports
Likely not needed
Exact totals
50 g · 2 hours
Saved estimate
Vehicle exposure
Engine-bay exposure — use rated material or OEM
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
Replacement key housing for a 2003 Honda Accord (UK) I Printed with ABS on a TAZ 5 240C/110C. I used the button layout from @Cleven's "Honda Key Housing Replacement" but found the electronics from my key was thicker than his, and we don't have a panic button. The electronics is a slightly different shape in order to leave some space for the imobiliser chip. The imobiliser chip is very important! It is a glass tube under a white plastic slip in the original honda key remove it carefully, wrap in blutac and insert into the space left in the printed key. If the imobiliser chip is missing and you put the key in the ignition, the ignition will lock the key in and you wont be able to start the engine or remove the key. If this happens just hold the imobiliser chip near the ignition.
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Honda Emblem with M5 (5mm) screws
Honda Accord
Honda Accord HEADLIGHT MOUNTING
Honda Accord
washer cap Honda Accord 7
Honda Accord
Boneloc Trunk Hooks
Honda Accord
Honda tubing snap clip
Honda Accord
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
