Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Hyundai Accent License Plate Bracket
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA for durability and heat resistance
Saved part guidance
Strength start
20-30% infill for strength and minimal weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Basically I wanted to make a license plate bracket for the Hyundai Accent because I couldn't find one online. Make sure that you sand down the tabs so that the bracket doesn't scratch up the front bumper if that is something that you worry about. Otherwise just add some tape to the back of your license plate so that you don't scratch up the front lip. I also passed a zip tie through the lower bolt holes of the license plate, secured the free end with a zip tie head, and ran a zip tie around the lower portion of the bracket so that the license plate would be flush with the car. If you bought a new bumper after an accident or bought a car from a no front license plate state, this is a great option to remain compliant, but keep from drilling into your bumper.
Originally published on thingiverse.com by Christian Gotsch (pieindaface) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
BMW E36 Fog Light Air Vent
BMW E36
BMW X5 E70 Center Console Blind Plate
BMW
Toyota Tacoma/Taco V1
Toyota Tacoma
Volkswagen VW Golf MK3 trim of steering wheel repair
Volkswagen Golf
Window Crank Handle for Volkswagen
Volkswagen
