Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Door_Speaker_Replacement__Adapter_v2.stl | Primary model | 66.0 KB STL | 11g $0.26 | 12g $0.28 | 26g $0.62 | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Hyundai Sonata Door Speaker Replacement Adapter
Description
This is a replacement bracket for a 2007 Hyundai Sonata Limited to replace the door speakers. The stock door speakers on the car use a bracket that puts them further out of the door and that bracket is held in with rivets. This bracket is to replace the factory 6.5" speaker with an aftermarket 6.5" bracket. The model is specifically designed to fit a Skar Audio TX65 | 6.5", but will fit any speaker with the following size constraints: General Specifications ====================== Total Height - 2.99" Mounting Depth - 2.46" Magnet Diameter - 3.72" Cut-out Diameter - 5.63" Outside Diameter - 6.50" Please let me know if you have any questions. Thanks for looking!
Originally published on thingiverse.com by Taneleer Tivan (BusseyBank) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Chevy/GMC Door Speaker Mount
1986 Bronco Switch Plate Bezels
Kia Picanto JA Rear Speaker Bracket
Brackets for Focal ISS165 kits in KIA Soul EV 2017
GMC Canyon Chevrolet Colorado JBL GTO629 rear speaker mount bracket - OpenSCAD
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
