Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ABS filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Improved Cup Collar and Insert for 97-01 Jeep Cherokee XJ
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This collar should help make drinks less "tippy" in the rear-most cupholder. The insert makes for a flat bottom surface to help too. This was sized to fit a "Yeti" cup, though should fit a handful of other cups. I would advise using some narrow strips of adhesive velcro to hold this collar in place, but still be removable for the big cups that still fit well in the cupholder without the collar. I would advise 100% infill, at least at the narrowest part that faces directly straight forward. And PETG should work fine, though ABS is advised if you live in an environment that sees 90 degree days regularly where the part can bake in the sun all day. Or just, print with PETG and remove it from the vehicle during the hot days. Costs about $4 to print at 100% infill.
Compatible Vehicles
Originally published on thingiverse.com by Bryant Sapp (MolecularHornet) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
