Files (12)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Improved Garmin GPS mount - USB type for Skoda Citigo, VW Up and SEAT Mi
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
12 hosted model files
STL + STP
Material start
PETG or ASA
Saved part guidance
Strength start
20-30% infill with 1.2-1.6mm walls
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is version 2 of the Garmin GPS mount for the later type fitting in the 2017 Citigo, Up and Mi which have a USB socket under the base. The neck has as a 17.4mm radius ball to match the standard socket on Garmin GPS brackets. It should be tall enough to take up to 6" satnavs. This new design has an upgraded version of the clever spring clip design from XenoBlaster and is a much more stable fit than my earlier version. For extra security print two of the fillers (mirror one of them in the slicer). Press them into the spaces at the side of the mount after it is in place to lock the tabs out.
Compatible Cars
Originally published on thingiverse.com by Ian Horsfall (gt6k) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
VW up phone holder
VW Up! v baseplate
Garmin GPS mount - later USB type for Skoda Citigo VW Up and SEAT Mi
VW Up Smartphone Holder
VW up! 1.0 Adapter für Handy-Halterung (z.B. Brodit 711083)
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
