Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg ASA / ABS
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | ASA / ABS 20% | ASA / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ford_.stl | Printable file | 793.7 KB STL | 25g $0.61 | 28g $0.66 | 60g $1.45 | Use a high heat-resistant filament due to the high temperatures inside the car |
| ford_focus_infill.stl | Printable file | 217.4 KB STL | 16g $0.38 | 17g $0.41 | 37g $0.90 | Use a high heat-resistant filament due to the high temperatures inside the car |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
infill for FORD FOCUS MK2 CENTER CONSOLE STORAGE
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
Infill for FORD FOCUS MK2 CENTER CONSOLE STORAGE There is two models. First is full block - so use boolean to modified it for your needs. The second one is my example how I use it like a socket holder there is a small gap between so I used 3mm floor XPS (or mirelon or some rubber) to fill it and the 3d printed part is firmly inserted. Attention!!! Inside the car, is dangerous of high temperatures, therefore use only filaments with high heat resistance. PLA or PETG has softened and deformed. I have used HIPS now and so far it is good.
Compatible Cars
Originally published on thingiverse.com by JHR B.ton (jhrbton) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
