Files (5)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
iPhone 6 & 7 In Car Holder (Jaguar X-Type)
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
5 hosted model files
STL
Material start
PETG or ASA for durability in a car environment
Saved part guidance
Strength start
20-30% infill for a balance between strength and weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I was looking for a iPhone holder for my car, the one that seemed to suit most of my requirements was this http://www.thingiverse.com/thing:609134 but it didn't totally work. I have a 2004 Jaguar X-type so I redesigned basically all elements of this to make it better fit the vehicle. As the photos show, it still allows access to all the heater controls and the AC LCD screen, it blocks off the CD player controls but as this thing mounts in the CD slot, you wont be using them anyway. The piece prints in 3 sections, the CD Bracket, the iPhone Cradle and the Lowering Arm. Due to the size of my printing bed, I had to split all the parts into two, so there is a Left and Right for all the pieces aside from the lowering arm. This piece is symmetrical and so you just print 2x of these. The CD tray section for some reason isn't an amazing fit and on bumps and things it can come loose, If anyone has any suggestions how to fix this, let me know or feel free to remix it.
Compatible Cars
Originally published on thingiverse.com by Chris Hawkins (computerstar2000) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Jaguar XF X250 Phone Holder
Jaguar I-pace MagSafe Phone Holder
Jaguar XF X250 Phone Holder RHD
14.5mm ball phone mount for 3rd Gen Toyota Tacoma
1/2U Cell phone holder
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
