iPhone Holder for Mini Cooper vehicles

0 downloads62 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill with 1.2-1.6mm walls

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This will replace the Ashtray in your Classic Mini. --Box-- Use six M2.5 x 15mm screws to attach the front to the main Box. Here you will also need to cut the thread into the Box. --Slider-- Use one M3 x 15mm screw to attach the small slider to the box. Best to use a locknut from below. Not to tight so that it slides in and out easy. Use three M4 x 10mm screws to attach the Phone Holder to the Slider. In the Slider you need to cut an M4 thread. To connect the two sliders i used a cut of peace of 3mm Filament. -- Mount to Mini -- Once assembled push the slider in all the way and mount the box to you Mini. Done! I only have an iPhone so i only made an iPhone holder. You can create your own adapter to suit your Phone. The three mounting screws are 15mm apart. A Spin off EMPY BOX is also available: http://www.thingiverse.com/thing:2207925