Jeep JK Wrangler A-Pillar RAM Mount - image

Files (1)

JK_Wrangler_A-Pillar_RAM_Mount.stl

STL

751.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

27g

Based on 25% main infill across listed model files

Material cost

$0.65

Filament only at roughly $24/kg PETG / ASA

Print time

46m–1.3h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
JK_Wrangler_A-Pillar_RAM_Mount.stl	Mount / bracket	751.3 KB STL	25g $0.60	27g $0.65	59g $1.42	Ensure the mount is oriented to minimize supports and optimize print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Jeep JK Wrangler A-Pillar RAM Mount

0 downloads165 views0 likes

Shared by

Alfred

Verified

Description

I designed this RAM Mount using a 5/16" 90mm long allen key cap screw to mount on the A Pillar of my Jeep JK Wrangler. I will be using it to hang a RAM style arm that will hold my phone holder/charger.