Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Light Covers

Jeep Wrangler auxiliary rear light bracket

1 downloads166 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Johan De Vries (jdev99)

Description

I have a 2015 JK and found the reverse lights to be very poor for ligthing up the area behind you at night. After some searching I found some nice ideas on how to install additional reverse lights and decided to make my own. I bought a set of these MicTuning 4" 18W LED bars on Amazon and designed a bracket in Sketchup. I also replaced the original reverse light bulbs with LED versions, to reduce the total current when adding the light bars. I think I will have sufficient light now when reversing.;) https://www.amazon.com/dp/B00KLC82B6/ref=cm_sw_em_r_mt_dp_U_qefYDbFRA7QEV The Sketchup file is also attached.