Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| PicantoRearSpeakerBracket.stl | Mount / bracket | 197.7 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Kia Picanto JA Rear Speaker Bracket
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ASA for durability and heat resistance
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for a balance between strength and weight
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a speaker bracket to allow larger 6.5" speakers to be mounted to the rear doors of a 2018+ Kia Picanto. It was designed for a Picanto GT, but should fit other variants. The bracket has 4 holes for speaker mounting, a tab to fit the connector clip, and three holes for mounting to the door. The original bracket is riveted to the door, so a fair bit of work is required to drill them out and then install rivnuts/nutserts to mount the new bracket. I used M3 rivnuts as they fit the holes without drilling into the door. M3 is strong enough to support the speaker.
Compatible Cars
Originally published on thingiverse.com by Tim Zamagias (zmit) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Kia Rio UB Speaker bracket ring
Chevy/GMC Door Speaker Mount
1986 Bronco Switch Plate Bezels
Hyundai Sonata Door Speaker Replacement Adapter
Brackets for Focal ISS165 kits in KIA Soul EV 2017
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
