Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Lotus Elise / Exige S1 phone dash mount clip
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Lotus Elise / Exige S1 dash mount clips. These clips hook into the switch or heater recess at the bottom, and the top dash join at the top. Should not scratch the top rail's painted finish but YMMV. Use with care. They are blanks so you can attach whatever phone or sat nav mount to them that you want. The picture shows a pair of prototypes in white PLA, with a printed phone mount glued to them. This holds surprisingly well. Access to the controls under the phone mount is slightly impeded by this design, but you can still see and operate them without too much effort. The phone mount shown is https://www.thingiverse.com/thing:4788572 I found the curved profile on the original Thing wasn't a great fit for the S1 dash rail (too tight), so I added a break in the curved section with a circular ring acting as a spring. I made it thinner and doubled it, but you can always take one of the clips and stretch it along the Z axis if you prefer a thicker mount style similar to the original Thing.
Compatible Vehicles
Originally published on thingiverse.com by Jon Bradbury (RetroJonB) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
