Lumia 520 Car Vent Mount (Renault Thalia/Clio II) - image

Files (4)

lumia520_holder_1.stl

STL

313.1 KB

lumia520_holder_2.stl

STL

101.9 KB

lumia520_holder_3.stl

STL

143.5 KB

lumia520_holder_4.stl

STL

86.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
lumia520_holder_1.stl	Mount / bracket	313.1 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation in the print area to prevent warping.
lumia520_holder_2.stl	Mount / bracket	101.9 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation in the print area to prevent warping.
lumia520_holder_3.stl	Mount / bracket	143.5 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation in the print area to prevent warping.
lumia520_holder_4.stl	Mount / bracket	86.6 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation in the print area to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Lumia 520 Car Vent Mount (Renault Thalia/Clio II)

0 downloads57 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

4 hosted model files

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill with 1.2-1.6 mm walls

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Holder design for my Renault Thalia (Clio II). You can design your own vent mount part for your car and screw it to the holder. Glue together pieces 1 and 2 and pieces 3 and 4. I use screws to join phone holder and vent mount part. I use small pieces of foam tape as soft pad. That way phone doesn't move in holder.