Files (3)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Magnetic phone holder for Nissan X-Trail T30
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Magnetic holder with fastening on the front airflow grille. Assembled on the basis of the "Hoco Lotto" holder from aliexpress. Magnets, a metal plate and a rubber pad were used from it. If necessary, the model can be easily redone in such a way that the elastic band is not needed, fitting it to the existing magnets. I'm attaching the Fusion 360 source. Printed from ABS. I glued the halves together with acetone, then sanded and polished. Магнитный держатель телефона с креплением на решетку фронтального обдува. Собран на основе держателя Hoco Lotto с али, из которого были позаимствованы магниты, металлическая пластина и резиновая накладка. При желании рамку несложно переделать таким образом, чтобы резинка не понадобилась и собрать из любых имеющихся магнитов. Исходник Fusion 360 прилагается. Печатал из АБСа. Половинки склеил между собой ацетоном, стянув на время высыхания струбциной. После чего немного зашкурил и подполировал.
Compatible Vehicles
Originally published on thingiverse.com by (wu5) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
