← Back to Browse Parts
Mazda 3 - Diales navegación / Navigation dials - image

Files (6)

nav_cap.stl
STL
267.9 KB
vol_2_cap.stl
STL
169.4 KB
vol_3_cap.stl
STL
147.7 KB
vol_5_cap.stl
STL
184.8 KB
vol_6_cap.stl
STL
167.5 KB
vol_cap.stl
STL
69.8 KB
Print guidance estimate
Uses saved filament metadata
Print cost & setup estimate
Saved filament data plus editable planning inputs for cost and time.
6 model files
Recommended kit
50g

Based on 25% main infill across listed model files

Material cost
$1.20

Filament only at roughly $24/kg PETG / ASA

Print time
2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced itemWhat to verifyPrice & availability
PETG filamentAmazon · Affiliate linkAmazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.Check price at Amazon
ASA filamentAmazon · Affiliate linkAmazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Accessories

Mazda 3 - Diales navegación / Navigation dials

0 downloads300 views0 quality score

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

6 hosted model files

STL

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill with 1.2-1.6 mm walls

Saved part guidance

Orientation / supports

Likely not needed

Exact totals

50 g · 2 hours

Saved estimate

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

0

License & use

CC BY
Commercial use allowed
Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

MC

Shared by

Michael Chen
Verified

Description

Tapas personalizadas de los diales de navegación de sistema y volumen de modelos Mazda 2013-2019 (aprox) (Mazda 2, 3, 6, cx3, cx5 y mx5). Hay que quitar previamente las originales. Si no se pudieran quitar haciendo palanca con herramientas de plástico de teléfono móvil habrá que sacar los diales. Salen tirando fuerte hacia arriba con las mismas herramientas de móvil. Por detrás se ven las pestañas para desmontar las tapas. Las nuevas se pegarán con pegamento que fije bien pero permita despegar cuando sea necesario sin romper. Si se emplea cinta de doble cara se eleva demasiado. Hay varios modelos de tapa de dial de volumen: sin inscripción para cualquier modelo, con inscripción 2 para Mazda 2, 3 para 3 y cx3, 5 para cx5 y mx5 y 6 para Mazda 6. Custom caps of the system and volume navigation dials for Mazda models 2013-2019 (approx) (Mazda 2, 3, 6, cx3, cx5 and mx5). The originals must be removed beforehand. If they cannot be removed by prying them off with plastic mobile phone tools, the dials will have to be removed. They come out pulling hard up with the same mobile tools. From behind you can see the tabs to remove the covers. The new ones will be glued with glue that fixes well but allows peeling off when necessary without breaking. If double-sided tape is used, it rises too high.

Compatible Cars

Published Mar 9, 2026Updated Aug 9, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.