Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Mirror Covers

MAZDA MIATA MX5 WATER TANK COVER AND MIRROR SLAT

0 downloads234 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

cahit ogün onat (coonat)

Description

In order to produce the Mazda Miata MX5 water tank cap and mirror moldings, the original mirror strip had to be transferred to the computer. For this, with the measurements we have made with the caliper, we have detailed the bar as left and right, as well as the water tank cover in detail and as stl. After pressing the G-codes (with Cura) BeamUP3D S, which we prepared to print the mirror laths with black Copolyester and the water tank cover with Flex filament, we cleaned the supports on the laths and installed them in the vehicle. We used the slats in the vehicle without any surface treatment.