mazda mx-5 mx5 miata roof latch button fix with adjustable screw

0 downloads56 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ABS

Saved part guidance

Strength start

20-30% infill for durability

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-SA

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

top latch fix for mazda miata mx5 i recently got a hardtop and one of the latches wouldnt stay shut so i remixed this design by Visser3 to make it more like the stock button but with a 3mm hole for a screw just like those from flyin miata. i printed one from pla to test the model since its only 5g it actually works better than expected even without the screw. i would recommend to print these out of petg or abs since pla would melt and deform from the heat and sun. if this breaks i might make a jig so i can make the stock metal button with the hole and tap it to fit the m3 bolt. i hope its usefull to you:).