Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Mazda MX5 Miata Cup Holder System
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA
Saved part guidance
Strength start
100% for the bracket, 50-70% for cup holders
Saved part guidance
Orientation / supports
supports likely for attachments, verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a modular Cup Holder System for the early (89-97) Mazda MX5 (NA) Miata. The bracket attaches to the side of the console near the radio/heater panel (left, right or both sides) using the existing screw holes. You may need to source a longer screw to mount it. The various accessories slide on and off so you can quickly change them to use different ones or none at all. The currently available accessories are: Small cup holder - energy drink cans (~65mm) Medium cup holder - soft drink cans (~70mm Coke can) Large cup holder - Insulated coffee mugs (~80mm) Phone/stuff and pen holder - LH and RH versions (so pen isn't near shifter) Coin holder - fits USA coins Recommend 100% infill for the bracket, a little less for cup holders. Supports should be used for the various attachments, but none are needed for the bracket. Enjoy!
Compatible Cars
Originally published on printables.com by rreibel · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Mazda Miata ND ND2 Teeth
Mazda MX-5
MX5 / Miata (NA) Ashtray delete
Mazda MX-5
Mazda Miata (MX-5) NB
Mazda MX-5
Miata Gauge Panel V3 + V4 - Turbo Boost & AFR Gauge Mount
Mazda MX-5
Miata Air Vent Cup Holder
Mazda MX-5
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
