MB Sprinter rear view mount for Garmin Satnav - image

Files (1)

sprinter-garmin-ball-v2.stl

STL

527.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
sprinter-garmin-ball-v2.stl	Primary model	527.8 KB STL	Slice file	Slice file	Slice file	Ensure the mount is oriented to minimize supports in the slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mirror Covers

MB Sprinter rear view mount for Garmin Sat Nav

0 downloads86 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

ABS or ASA for durability and heat resistance

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between weight and stability

Difficulty

Not rated — inspect geometry

Vehicle heat

Higher-heat material; verify location and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Mount for Mercedes Sprinter rearview mirror to garmin satnav (or other device) ball mount. Work in progress - print in ABS to prevent sagging in summer heat!