Mercedes Benz Eaton M62 Supercharger to Jeep YJ 2.5L Adapter Plate!!

0 downloads86 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability and heat resistance

Saved part guidance

Strength start

20-30% infill for strength, with 2-3 perimeter walls

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

What are you looking at today you ask? Well, this here is an adapter mounting plate to fit a Mercedes-Benz Eaton M62 supercharger to Jeep YJ 2.5L. It fits the supercharger on to the Jeep's Air Conditioning mount. So, if you don't have A/C why not add a supercharger, right? This particular supercharger comes out a Mercedes-Benz C230 or SLK230 from 1998 - 2000. I printed this out and test fit the supercharger with the plastic one. Once I was happy with placement, I used as a template and traced onto a 3/8" thick piece of aluminum and cut out with a jigsaw and drill.