Mercedes Benz Sprinter Console Abdeckung - image

Files (2)

console_Abdeckung_v4.stl

STL

156.5 KB

console_Abdeckung_v5.stl

STL

143.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

15g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.37

Filament only at roughly $24/kg PETG / ASA

Print time

26m–43m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
console_Abdeckung_v4.stl	Printable file	156.5 KB STL	14g $0.34	15g $0.37	34g $0.80	Ensure a strong adhesion to the print bed to prevent warping
console_Abdeckung_v5.stl	Printable file	143.5 KB STL	14g $0.33	15g $0.36	33g $0.78	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Mercedes Benz Sprinter Console Abdeckung

0 downloads62 views0 likes

Shared by

Alfred

Verified

Description

I designed a small cover for the console of a Mercedes Sprinter Van. I guess this was the ashtray before.. V5 has a better grip - but cannot be removed so easily once places ^^.