← Back to Browse Parts
Mercedes Benz Warndreieck Halter - image

Files (1)

Sprinter_Warndreier_Halter.stl
STL
100.5 KB
Print guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
1 model file
Recommended kit
13g

Based on 25% main infill across listed model files

Material cost
$0.32

Filament only at roughly $24/kg PETG / ASA

Print time
23m–38m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL fileRoleSource sizePETG / ASA 20%PETG / ASA 25%100% solidRecommendation
Sprinter_Warndreier_Halter.stlPrimary model100.5 KB STL
12g
$0.29
13g
$0.32
29g
$0.70
Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Mercedes Benz Warndreieck Halter

0 downloads58 views0 likes
A

Shared by

Alfred
Verified

Description

Holder for the warning triangle of the mercedes benz sprinter 903 may fit to other models too.

Compatible Cars

Updated Jul 17, 2026

Originally published on thingiverse.com by Philipp Knobloch (phikno) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.