Files (2)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Mercedes W204 (and other models) carpet clip
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
2 hosted model files
STL
Material start
PETG or ASA for durability and temperature resistance
Saved part guidance
Strength start
20-30% infill for a balance between strength and flexibility
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
The parts may need some adjustments (small scaling) to fit properly in existing clip in a car (depends on your printer). My advice, print first the top part and check if it fits in the car. Then print the bottom part and check if it's not too loose with the top part and not 100% tight. It has to snap under pressure (about 70kg) so it wont disconnect while unclipping the carpet.
Compatible Cars
Originally published on thingiverse.com by Piotr Kulikiewicz (presley4b) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Mercedes Benz HEADREST MEC 1409700126
Radio frame with pocket for Mercedes 190 W201
Mercedes-Benz
Mercedes 190E W201 Vent Surround
Mercedes-Benz
Side Air Vent for Mercedes 190 W201
Mercedes-Benz
Mercedes Benz 190E/W201 Handbrake Replacement Button
Mercedes-Benz
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
