Files (1)

eg8NY3isjaA.stl

STL

5.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

Based on 25% main infill across listed model files

Material cost

$0.22

Filament only at roughly $24/kg PETG / ASA

Print time

15m–26m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
eg8NY3isjaA.stl	Primary model	5.0 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

miata courtesy light blank

0 downloads30 views0 likes

Shared by

Alfred

Verified

Description

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/eg8NY3isjaA surprisingly there is no miata courtesy light blank out there, so I had to make it myself I am currently making a miata courtesy light to USB adapter because the courtesy lights on the Mazda miata are pitiful and useless to me, so the best option is to utilize the 12v that those incandescent lights utilize so poorly to efficiently use it to charge my phone the hardware I'm using is a dollar tree 12v cigarette lighter port to USB adapter, I hacked the plastic shell away, and soldered a ground and 12v input wire to it, and tested it and it worked pretty well, no popped fuses this is just the first base model I've made of the cigarette lighter USB adapter, so stay tuned for the upgraded version of this the tinkercad file is there and the stl file should also be of use for anyone to modify and make their own little adaptations.