Miata Cup Holder / Phone Holder 2.0 (iphone 6 With lifeproof) - image

Files (2)

Phone_Holder_Clips_x2_Final.stl

STL

13.4 KB

Phone_Holder_Final.stl

STL

972.7 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

2 model files

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Cup Holders

Miata Cup Holder / Phone Holder 2.0 (iphone 6 With lifeproof)

0 downloads77 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

2 hosted model files

STL

Material start

PETG or ASA for durability in a car environment

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Hi Guys Now that its summer i realized the old design was too thin (it melted sitting in my car) and i also realized there no reason i couldn't Keep the cup holder functionality! if you printed the old design you know the struggle at having to swap the cup holder in and out in the drive thru! LOL and as an added bonus i made it incredibly easy to get the clips to line up all you do is pop the little clips into the bottom and maybe add a little super glue. (this is a really snug fit so once you get it pressed in you don't really need super glue but it doesn't hurt! Hope this can help some fellow Miata drivers out! and if you print don't forget to post it on here i wanna see some miatas and their fancy new cup holder! Please note this will only fit an iphone 6 with a lifeproof case if anyone wants it just for the 6 request it and i will see what i can do:).