Files (3)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Miata GV style tail panel
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
3 hosted model files
STL + STEP
Material start
PETG or ASA for durability in outdoor conditions
Saved part guidance
Strength start
20-30% infill for a balance between weight and strength
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
UV/weather exposure — ASA is the starting point
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Make sure to like, share, remix, and collect! Click on "Thing Files"! File Descriptions (Orientations are out of whack): gv full.stl - original scan, weighs a ton, has a ton of mess - for daring editors only. GV corrected and reduced - simplified and ready to print (kind of)- probably the same as solid v2 corrected. GV full step - not sure if it works, but try it. Supposed to be a solid file. Feel free to mod it and remix it, and definitely repost it. I suggest using at least a 0.6 nozzle to print this, however before even printing it, maybe throw the quad mesh or the step file into fusion360 and mess with it to straighten it out. Post remixes! Headlights: https://www.thingiverse.com/thing:4014792
Compatible Cars
Originally published on thingiverse.com by Suren Simonyan (rennwaffen) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
NC Miata Backup Camera Mount
NC Miata Backup Camera Mount
Clips - LED Light Pipe Tube & Wire Holder
NB Miata Trunk/Fuel Lid Levers Cover
2017 Mazda CX-5 Aftermarket Cargo Cover End Cap
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
