Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
mount for Citroen Jumper front console / smartphoneholder
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA
Saved part guidance
Strength start
20-30% infill for durability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
smartphoneholder The smartphoneholder is designed to fit my Samsung A53 with open cover. Please adjust according to your phone. console mount / holder You can choose between 4 differnt angles for the holder/mount. 0° lets the smartphoneholder stay vertically. (as shown in the pictures. 15°, 30° and 45° mount tilts the whole thing up to be more horizontally. Make sure to use material that resists the heat in your car. installation To install it, you can loosen the two screws and fit the consolemount into the space. Hold and try your angle, before you glue the smartphoneholder to the consolemounting.
Compatible Cars
Originally published on printables.com by FrankyD80 · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Mobile phone holder Iphone 13 Pro Max for Citroen Jumper
(i)phone holder Citroen DS3
Aygo / C1/ 108 Phone Stand
Support iPhone 7 pour Citroen Berlingo II (B9) et Peugeot Partner
citroen C3 phone mount
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
