Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Mounting for the TEYES/KINGBEATS head unit (for Toyota Prius ZVW30)
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
The standard KINGBEATS K2+ for the 2010 Toyota Prius ZVW30 is mounted onto the radio frame using an adapter frame. Both frames are equipped with clips. However, this standard adapter frame didn’t fit into the radio frame. I had to trim the adapter frame and its clips slightly. This resulted in the adapter frame falling through the radio frame. So, I decided to print the mounting based on the standard metal mounting that comes with the head unit. My model is for the right-side mounting. The left-side mounting is symmetrical, so you would have to mirror my model. I printed my mounting using supports. The orientation of the mounting model is presented on the screen shots from Ultimaker Cura attached below. I’m sharing this model with you, guys. Hope it’ll be of use.
Compatible Vehicles
Originally published on thingiverse.com by Max Chebyshev (Maxwellcheb) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
