Mustang Pony shifter knob (M12 X 1.75) V2

0 downloads48 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability

Saved part guidance

Strength start

20-30% infill for a balance between weight and strength

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

M12 x 1.75 threads The pic is black abs sanded smooth in steps starting with 320 grit and I worked my way to 1500 grit. I used a threaded piece and I stuck the other end in my drill. Will upload that tool shortly. You could make an easier job of this with slightly better results by sanding with just 320 grit and using an acetone vapor bath. I will likely try that with another knob. Link for tool:https://www.thingiverse.com/thing:3525268