Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| MX5_NB_8_inch_Speaker_Mount.STL | Mount / bracket | 464.2 KB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
MX5 NB 8" Speaker Mount
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ASA
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill with 1.2-1.6 mm walls
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Mounting bracket to install 8" speaker into the NB (mk2/ 2.5) MX-5. The bracket also has a little hood to divert any water that may get into the car to help protect your new speakers;) The mounting holes in the door already line up nicely with an 8" speaker but I found the hole in the door wasn't large enough for the speaker to sit flush. The mount just raises the speaker slightly to allow it to be installed properly. Also I had to sand down the speaker grill ribs in the door covers to get a nice fit.
Compatible Cars
Originally published on thingiverse.com by Patrick Berry (CASUALHERO) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Keyhole Plug v1
Mazda MX5 Miata ND 6.5" Door speaker adapter bracket
Mazda Miata - Door switch cover
NA Miata Door Tweeter Speaker Cover
Mazda Miata Top door panel repair part
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
