Files (1)
Based on 40% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
NA Mazda Miata under radio cubby (pre 96)
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA for durability in a car environment
Saved part guidance
Strength start
3 solid walls at 0.6mm thick as used by the designer, or a moderate infill for lighter weight
Saved part guidance
Orientation / supports
Likely not needed
Exact totals
50 g · 2 hours
Saved estimate
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
The pre 96 NA Miatas have a tombstone that is slightly larger than DIN, but at least in the case of my car, have a metal radio support try that is DIN sized. In an effort to have a better fitting part, and because I was too lazy to buy a bunch of cubbies and see what fits I designed and printed this. Its 123mm tall, and 215 wide. I had to print diagonally on my printer, and the screw bosses needed supports. Nominal wall thickness is 2.5mm, I rocked 3 walls at .6mm thick so effectively its printed solid for the majority of the part. The screw holes are over sized and ovaled to allow for adjustment before tightening. The clearance for the screws is based around the OE screws on the Miata. STEP and STL are included to make modification easier.
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Mazda Miata ND ND2 Teeth
Mazda MX-5
MX5 / Miata (NA) Ashtray delete
Mazda MX-5
Mazda Miata (MX-5) NB
Mazda MX-5
NB Mazda Miata Center Console Cover - Driver and Passenger
Mazda MX-5
Miata NA6 Tombstone Replica
Mazda MX-5
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
