Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Navigation system Car holder for Nissan NV200
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
=============================================================== Navigation system Car holder for Nissan NV200 Usually an external navigation system is supplied with a suction cup to place it against the windshield. However, I prefer to place the system on the dashboard and that is why I have designed a special holder for the Nissan NV200. I made it in such a way that it fits exactly into the opening on top of the dashboard and the connecting cable can be led almost unobtrusively to the power plug. The holder is suitable for the TomTom Go5200 but other systems will also fit if the suction cup diameter is not larger than 60 mm. Mounting 1) Make the opening of the suction cup as large as possible by turning the ring. 2) Place the suction cup in the narrow opening on top of the holder and then tighten the fixing ring at the suction cup. 3) Place a strip of double-sided tape on the back of the holder (see drawing). 4) Feed the cable through the 4 openings, provided for this. 5) Remove the second adhesive layer from the tape and place the holder in the opening on the dashboard. (see drawing) 6) Route the cable along the edge of the dashboard (see photo) to the power connector. Cable can be secured in some places with, for example, “Vehicle Double Sided Sticker Car Adhesive Acrylic Foam Tape” available via ebay. 7) Finally place the cover on top of the holder.
Compatible Vehicles
Originally published on thingiverse.com by Joseph Luijten (DutchSwede) · License: CC0
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
