Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Nissan 465845 Brake/Cruise Control Stopper fits 240SX, 350Z, Altima, Frontier, Maxima, Pathfinder, Sentra, Versa, Xterra
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
2 hosted model files
STL
Material start
PETG or ASA for durability in a hot car environment
Saved part guidance
Strength start
20-30% infill for a balance between strength and weight
Saved part guidance
Orientation / supports
Likely not needed
Exact totals
50 g · 2 hours
Saved estimate
Vehicle exposure
UV/weather exposure — ASA is the starting point
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
Ready to save $15 on a Nissan OEM Part? Older Nissan owners have long grappled with the rubber stoppers that deteriorate over time as YouTube and the forums are filled with questions like "Cruise Control stopped working" or "Brake lights are on when the vehicle is off". This part replaces Nissan 46584-5P010, previously 46512, that fits the following models: 240SX, 350Z, Altima, Frontier, Maxima, Pathfinder, Sentra, Versa, and Xterra. See https://parts.nissanusa.com/p/89736453/46584-5p010.html for full details on location and installation. This replacement is a two-part solution with the stopper portion and a cap to snap the stopper into place. The brake and cruise control operate on a switch that is depressed when the brake petal is not engaged however when the rubber stopper is not present, the switch is no longer engaged (making the vehicle think the brakes are engaged). Fit the stopper into the brake pedal (facing the driver and the switch) and press the cap into the rear of the stopper. I know it's tight getting in there, but I've replaced the broken part for both the cruise control and brake lights in my 2004 Nissan Xterra.
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
