Nissan Skyline R32 Cup Holder (IMPORTANT Read Summary) Updated
Files (8)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
leonardo gallegos (ace_305_ace)Designers selling from the US, Canada, the UK, the EU/EEA (except Iceland), Switzerland and Gibraltar can also list separate original designs for sale and receive 80% of the listing price, paid out by Stripe in your local currency (conversion fees may apply). Claiming credits you here; it doesn't put this imported part up for sale.
Description
*-*-*-*-*-*-*-*-*UPDATE (3)*-*-*-*-*-*-*-*-*- Ok, so I printed the last.STL files I posted with a scaled down percent of 1-2% and it fit almost perfectly for me. so whichever file you may want to print MAKE sure you scale it down by at least 1-2% to have a good fit. Hope this helps! I uploaded pictures as well. *-*-*-*-*-*-*-*-*UPDATE (3)*-*-*-*-*-*-*-*-*- *-*-*-*-*-*-*-*-*UPDATE (2)*-*-*-*-*-*-*-*-*- Just added some.STL files. currently printing one to test out the size dimensions and see if it fit correctly. it was scaled up from the original version about 3 to 4% *-*-*-*-*-*-*-*-*UPDATE (2)*-*-*-*-*-*-*-*-*- *-*-*-*-*-*-*-*-*UPDATE(1)*-*-*-*-*-*-*-*-*- I added two more.STL files, they have not been tested or printed yet but some dimensions have changed to make it a tighter fit. also changed it to where there is no cutout for the USB as I understand a lot of you don't have one. Also, there is one with the GT logo which looks pretty cool. Like always you can test print and adjust the scale in case it is still too loose or too tight. *-*-*-*-*-*-*-*-*UPDATE (1)*-*-*-*-*-*-*-*-*- This print was made as a favor for a friend who needed a cup holder in his R32. ---This is nowhere near a professional molded part like the ones you can buy online which are specifically measured to fit that area.--- I tried my best to measure what I could while I had the car and eyeball the rest. He also had a USB so that's the reason for the cutout in the back. It also sits in place a bit looser than I wanted it to but since this is just a prototype, I will be modifying it down the line when I get a chance. I will also try to make different versions to accommodate those setups that don't have a USB. Also trying to make the cupholder as wide as possible with the space limitation. This part was done on Solidworks 2013 and I will include the part file so you guys can modify it yourself if you would like (.SLDPRT file). As I am not a professional designer but rather a student, the way I modeled the part may not be the best but it worked for now. Like I said it was only meant to be as a favor. Just figured others can benefit from it if they wanted to. By the way, if it's too lose you can scale it up a bit on your slicer and try printing it again.
Compatible Vehicles
Originally published on thingiverse.com by leonardo gallegos (ace_305_ace) · License: CC BY 4.0
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
