Opel Corsa Handy-Halter (ohne Bohren) Cell phone holder

0 downloads71 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill with 1.2-1.6 mm walls

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-ND

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Für unseren Neuen Opel e-Corsa (Modell Corsa F) haben wir uns Gedanken gemacht, wie eine Handy-Halterung aussehen müsste, die folgende Anforderungen erfüllt: 1. Ohne Bohren befestigt wird 2. mit einer Hand an- und abgesteckt werden kann 3. weitere Module wie einen Halter für die Ladekarten ermöglich Nach einigen Experimenten mit Prototypen, vgl. die Schritte im Corsa F-Forum: https://www.corsa-f-forum.de/forum/thread/402-handy-halter-ohne-bohren-f%C3%BCr-corsa/ ist diese superpraktische Lösung herausgekommen. Aktuell gibt es dafür je eine Schale für das iPhone xr und iPhone 7 (jeweils mit Originalschutzhülle) das zugehörige Kabel mit Winkelstecker gibt es u.a. hier: https://www.amazon.de/dp/B07FYB93YX?tag=corsa-f-forum-21 Die Datei "insert_auflage_batt_strich.stl" muss 3x ausgedruckt werden. english Version For our New Opel e-Corsa (model Corsa F), we thought about how a cell phone mount would have to look like that meets the following requirements: 1st can be attached without drilling 2nd can be connected and disconnected with one hand 3rd allows further modules like a holder for charging cards After some experiments with prototypes, see the steps in the Corsa F-Forum: https://www.corsa-f-forum.de/forum/thread/402-handy-halter-ohne-bohren-f%C3%BCr-corsa/ this super practical solution came out. Currently there is one shell each for the iPhone xr and iPhone 7 (each with original protective cover) the corresponding cable with angle plug is available here: https://www.amazon.de/dp/B07FYB93YX?tag=corsa-f-forum-21 The file "insert_auflage_batt_strich.stl" must be printed 3 times.