Files (4)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Glasses_Holder_Bottom.stl | Mount / bracket | 185.7 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for the clip part to prevent warping |
| Glasses_Holder_Clip.stl | Clip | 91.5 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for the clip part to prevent warping |
| Glasses_Holder_Full.stl | Mount / bracket | 214.4 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for the clip part to prevent warping |
| Glasses_Holder_Top.stl | Mount / bracket | 169.4 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for the clip part to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Opel / Vauxhall Astra K Glasses Holder
Print this part
Check the available model and saved setup details before opening your slicer.
Files
4 hosted model files
STL
Material
PETG or ASA
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for durability
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Last of the Astra K improvement series. Glasses/Tactical Pen holder. Holds on place by clip so no glue or tape is needed. However to reduce movement I attached kind of rubber pad on the bottom and side. Model in my case was split in order to insert and glue fabric to prevent scratches. PS: I was not able to create exact shape so fit is not perfect...bot works:) Bye.
Compatible Cars
Originally published on thingiverse.com by Martin Macko (sniperKE) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Rifter, Berlingo, Combo 2018 USB cable holder
OPEL Grandland X Waste-Bag-Holder
2009 Ford Flex coin holder
F150 Harborfreight FlashLight Holder (Quantum)
2011 Ford Escape TPU Key Tray Liner
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
