Perfect Fit Vent Slot Mount for VW Polo 6N1 - image

Files (1)

VentMount.stl

STL

543.1 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Vents

Perfect Fit Vent Slot Mount for VW Polo 6N1

0 downloads204 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill with 1.2-1.6 mm walls

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

High cabin heat — validate PETG or choose ASA/ABS

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

I wanted a vent mount for my Phone holder that doesn't wiggle around so much. So I designed one that perfectly fits the vent slots in my car. I have a '97 Volkswagen Polo 6N1. The mount has a hole in the centre for a screw. In that way you can connect anything to the mount you want. I used a combination of two Car Phone Holders. -> This is the main phone holder (https://www.amazon.de/UGREEN-Autohalterung-Handyhalterung-L%C3%BCftungsschlitz-kompatibel/dp/B07F3X8PXZ?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=ugreen+handyhalterung+auto&qid=1622820709&sr=8-4&linkCode=sl1&tag=meinerasenkante-21&linkId=ee788a41ca7b2800dd4406a612375bce&language=de_DE&ref_=as_li_ss_tl), since it had no ball joint, I combined it with an older mount which had a ball joint on it. I would recommend you try out these ball joints created by DieZopfe (https://www.thingiverse.com/thing:4739696). After printing you can just clip it between the vent slots.